Epson RC520 Manual page 194

Maintenance 6. Six-axis Drive Unit
(3) Disconnect the cables for the Cooling Fan from the connectors (J8 and J9) on the
(4) Remove the eight mounting screws that hold the Cooling Fan in place.
(5) Install a new Cooling Fan, and connect the cable of the fan to the connector on the
(6) Reattach the front panel.
(7)
180
DPB.
DPB.
Turn ON the six-axis Drive Unit and make sure that the new Cooling Fan runs
properly.
J8
J9
RC520 Rev.7