User Guide
Changing the Settings
On the [Adapter Properties] screen, change a parameter to desired value, and then click
[Submit] at the center of the screen.
The "Battery Backup" status is "Present". Clicking [Present] opens the Battery Status
screen as shown below.
You cannot change the values for the "Auto Learn Period",
"Next Learn Time", and "Learn Delay Interval".
■
The Status field shows "Charging" when the battery is being
charged. It shows "Discharging" when the battery is being
discharged.
■
When powering on the server after the battery replacement,
the Status may not immediately change to "Charging". In
that case, power on the server for several hours, and check
the "Status" again.
Figure 43: Battery Status Screen
Notes:
Warning
101
www.nec-computers.com