User Guide
7. Enter the virtual disk settings.
The [Enter RAID setting] step is displayed. Confirm the parameters, modify if
necessary, and click [Next].
At "The number of the total physical devices", the Parameter
File Creator displays the upper limit that the RAID controller can
support.
The total of "The number of physical devices used to create the
logical drive" and "The number of the physical devices specified
as the hot spare" must not exceed "The number of the total
physical devices" which are connected to the target system.
same model number to configure a logical drive.
Note: You can use only physical devices that have the
Caution
276
www.nec-computers.com