NEC Express5800 120Rj-2 User Manual page 266

User Guide
8. Follow the Guide line shown in the bottom of the screen and press Esc to show
the End user Menu.
■ <Test Result> shows the screen of the diagnosis completed
■ <Device List> shows the information of all the devices connected.
■ <Log Info> shows the log information and error messages of the
■ <Option> gives access to the different option menus.
■ <Reboot> restarts the server.
9. Select <Reboot> in the Enduser Menu above.
The Express Server restarts and NEC ExpressBuilder boot the system.
10. Exit NEC ExpressBuilder, and remove the DVD-ROM from the optical device
drive.
11. Turn off the server and unplug the power cord from the receptacle.
12. Reconnect all the LAN cables to the server.
13. Plug the power cord.
This completes the System Diagnostics.
aforementioned.
diagnosis. it can be saved to a floppy disk. To save the log information to
a floppy disk, insert a formatted floppy disk to a floppy disk drive and
select <Save [F]>.
266
www.nec-computers.com