Maintenance Tools With Remote Console - NEC Express5800 120Rj-2 User Manual

User Guide
■ System Information Viewer
Allows to view information on the processor and the BIOS and to export it to a text
file.
■ System Information Management
Allows to make a back-up copy of your data.
Without the backup data, the system-specific information and/or configuration
may not be restored.
We recommend that only authorized personnel be allowed to restore the backup
data.
■ System Management
The parameters of BMC (Baseboard Management Controller) are set for remote
control and alert.
BIOS/FW Updating
This menu allows you to update software modules such as the BIOS and firmware of
the server using the update disk (3.5-inch floppy disk) that is distributed by your
customer service representative.
Reboot the system from the floppy disk, and the various BIOS and firmware programs
are updated.
Do not turn off the server while the update program is running. If
this update process is interrupted, the system is unable to start.
ROM-DOS startup FD
Creates a support disk used to start the ROM-DOS system.
Test and diagnostics
Executes various tests on the server system to check if the server functions are normal
and if the connection between the server and the additional board is normal.
Once the Test and diagnostics have been executed, a system check program assigned to
each model starts.

Maintenance Tools with Remote Console

This subsection describes the procedure for using the Maintenance Tools via a remote
console.
Maintenance Tools contains a remote console feature that allows the system
administrator to set up the server from the management workstation (management PC)
via the network or the server's COM B (serial) port.
Caution
240
www.nec-computers.com