Network Driver - NEC Express5800 120Rj-2 User Manual

User Guide
9. Remove the NEC ExpressBuilder DVD from the drive, and restart the system.
[Cancel] button to close the dialog. Clicking the [OK] button will
cause a temporary loss of network connectivity.

Network Driver

Specify the details of the network driver.
Two standard network drivers will be installed automatically, but the link speed and
duplex mode must be manually specified.
[When PROSet is not installed]
1. The [Local Area Connection Properties] dialog box appears.
■ Procedure using a standard start menu
■ Procedure using a classic start menu
2. Click [Configure].
The properties dialog box for the network adapter appears.
3. Click [Advanced] and specify a [Link Speed & Duplex] identical to the value
specified for the HUB.
4. Click [OK] on the properties dialog box for network adapter.
[When PROSet is installed]
1. The [Intel PROSet] dialog box appears.
■ Procedure using a standard start menu
■ Procedure using the classic start menu
2. Click the [Link] and specify a [Speed & Duplex] value identical to the value
specified for the HUB.
3. Click [Apply] and click [OK].
If necessary, add or delete any protocols and services.
Notes: If you make no changes to the parameters, click the
Click Start menu, click [Control Panel], click [Network Connections],
and click [Local Area Connection].
Click the Start menu, click [Settings] and click [Network Connections].
The [Network Connections] dialog box appears.
Right-click [Local Area Connection] and click [Properties] from the pop-
up menu.
Click Start menu, point to [Control Panel], [administrative tools], click
[Computer Management] and then double click the [(Network Adapter
Name)] in the Network Adapter list.
Click Start menu, point to [Settings] and click [Control Panel].
Click [Administrative Tools].
Click [Computer Management] and then double click the [(Network
Adapter Name)] in the Network Adapter list.
307
www.nec-computers.com