NEC Express5800 120Rj-2 User Manual page 229

User Guide
Description: The application-specific permission settings do not grant Local Activation
permission for the COM server application with CLSID {555F3418-D99E-4E51-
800A-6E89CFD8B1D7} to the user {NT AUTHORITY\LOCAL SERVICE} SID {S-
1-5-19}.
This security permission can be modified using the component Services administrative
tool.
- The system can be operated normally.
In some cases, an event log is registered as follows when you install Windows
Server 2003 x64 Editions.
Event Source:Service Control Manager
Event Type:Error
Event ID:7011
Description:Timeout (30000 milliseconds) waiting for a transaction response from the
IMAP4Svc service.
- If this event disappears when the system is rebooted, the system can be operated
normally.
In some case, an event log is registered as follows when you operate Windows
Server 2003 R2.
Source: IPMIDRV
Type: Error
Event ID: 1001
Description: The IPMI device driver attempted to determine if the system supported an
IPMI BMC device. The driver attempted to detect the presence of the IPMI BMC by
searching the SMBIOS for Type 38 record. But either no record was found or the
record was not compatible with the version of the device driver.
If a SMBIOS Type 38 record was detected, the Dump Data field of the event contains a
binary representation of the record.
- If you use the "Hardware Management" feature provided by Windows Server
2003 R2, above-shown event log will be registered.
Windows Product Activation
"This copy of Windows must be activated with Microsoft before you can continue. You
cannot log on until you activate Windows. To shut down the computer click Cancel."
In Windows Server 2003, the above message will be displayed if you use the operating
system without executing the license authentication. Select "Yes", and execute the
procedure for license authentication.
Cannot install the operating system correctly.
■ Did you check the notes on installing the operating system?
229
www.nec-computers.com