Drive Cover - NEC Express5800 120Rj-2 User Manual

User Guide

Drive Cover

Open the drive cover when installing/removing a fan assembly, processor, and backup
file device or reconnecting an internal cable.
Removal
1. See the section
2. Pull out the server from the rack.
3. Slide the drive cover toward the front of the server while pressing the lock
button on the cover.
4. Lift off the drive cover from the server.
Installation
When installing the drive cover, check that the tab of the cover is securely inserted into
the slot in the server frame.
Slide the drive cover toward the rear of the server. The drive cover is locked when a
distinct "click" is heard. At this time, check the release button for normal state.
"Preparing Your System for Upgrade" on page 137
Figure 87: Removing the Drive Cover
Figure 88: Replacing the Drive Cover
141
www.nec-computers.com
to prepare.