NEC Express5800 120Rj-2 User Manual page 129

User Guide
Reconstruction
The procedure described below is based on the following assumption:
Add a HDD to a RAID5 virtual disk configured with three HDDs to make a RAID5
virtual disk configured with four HDDs.
1. Start WebBIOS.
Make sure that the status for the added HDD is indicated as "UNCONF
GOOD" in the right frame of the Top Menu.
2. Select "VD 0" (already been constructed) in [Virtual Drives].
Figure 82: Top Menu Screen
129
www.nec-computers.com