NEC Express5800 120Rj-2 User Manual page 114

User Guide
6. The VD 0 is created in the DG 0 as shown in the screen below.
7. Make sure that the VD is created correctly, and click [Accept] at the lower right
of the screen.
8. The confirmation message "Save this Configuration?" appears. Click "Yes" to
save the configuration.
9. The confirmation message "All data on the new Virtual Disks will be lost.
Want to Initialize?" appears. Select "Yes".
10. The "Virtual Disks" operation screen is displayed. If no other operation is
required, click [Home].
Figure 61: Virtual Disk Creation
114
www.nec-computers.com