NEC Express5800 120Rj-2 User Manual page 183

User Guide
5. Grasp the handle and firmly push the power supply.
The power supply unit is locked when a distinct "click" is heard.
6. Connect two power cords.
Use the power cords provided with the system. The AC power lamps flash
when the power cords are connected.
7. Power on the server.
The AC power lamps light on.
8. Check, by the Status lamp or on the POST screen, that there are no errors
related to the power supply units.
See "POST Error Messages" on page 200
If the AC power lamps are off, reinstall the power supply units. If the same
error message still appears, contact your sales representative.
Figure 137: Locking the Power Supply Unit
B A
E
A Power supply unit 1 (standard)
B Power supply unit 2 (option)
C Power cord for power supply unit 1
D Power cord for power supply unit 2
E AC power lamps
Figure 138: Connecting the Power Cords
D
for details on the error messages.
183
www.nec-computers.com
C