Installing Or Removing Random Access Memory - NEC Express5800 120Rj-2 User Manual

User Guide

Installing or Removing Random Access Memory

Install the additional DIMM (Dual Inline Memory Module) to the DIMM socket on the
motherboard in the server. The motherboard is provided with twelve DIMM board
slots.
installed.
■
The DIMM is extremely sensitive to static electricity. Make
sure to touch the metal frame of the server to discharge
static electricity from your body before handling the DIMM.
Do not touch the DIMM terminals or on-board parts by a
bare hand or place the DIMM directly on the desk. For static
notes, see
■
Make sure to use the DIMM authorized by NEC. Installing a
third-party DIMM may cause a failure of the DIMM as well as
the server. Repair of the server due to failures or damage
resulted from installing such a board will be charged.
■
When four or more sets of 8GB additional memory boards
are installed, the additional PCI slot can contain only one
option card and the factory-installed RAID card.
Note: Up to 48 GB of memory (4 GB DIMM x 12) can be
"Static Precautions" on page
Caution
135.
154
www.nec-computers.com