Installation (Ide File Devices) - NEC Express5800 120Rj-2 User Manual

User Guide

Installation (IDE File Devices)

1. See the section
2. Pull out the server from the rack.
3. Remove the drive cover. See
4. Unlock the lever of the optical disc drive, and take it out of the chassis.
■
Do not touch any other part than release lever when remov-
ing the optical disc drive or your fingers may get caught.
■
When an optional USB floppy disk drive is installed, pull the
device carrier half-way out, and disconnect the USB cable.
Pulling the device carrier completely out while the USB cable
being connected may damage the USB connector.
"Preparing Your System for Upgrade" on page 137
Figure 142: Removing the Optical Disc Drive
Caution
"Drive Cover" on page 141
190
www.nec-computers.com
.
.