NEC Express5800 120Rj-2 User Manual page 158

User Guide
11. Reinstall the support arm.
■
Make sure the support arm holds the processor duct firmly
(see figure below).
■
When the support arm comes up, you may lose the screws.
Press firmly the support arm before tightening the screws.
12. Install the components you removed previously.
13. Power on the server and verify that POST displays no error messages.
If POST displays an error message, take a note on the message and see the
POST error messages listed in
Figure 110: Reinstalling the Support Arm
A: USB cable
B: Support Arm
Notes:
Figure 111: Support Arm (Detail)
A: Support Arm
B: Processor Duct
"POST Error Messages" on page 200
158
www.nec-computers.com
A B
A
B
.