Re-Install The Network Driver; Optional Network Board Driver - NEC Express5800 120Rj-2 User Manual

User Guide
2. Click [(Network Adapter Name)] in the list.
3. Click the [Link] and specify the [Speed & Duplex] value the same as the value
specified for HUB.
4. Click [Apply] and click [OK].
You can also add or delete any protocols and services if necessary.
You can operate the process on the property dialog box for local area network which
can be displayed from [Network and Dial-up Connection].
[AddingServices]. [Network Monitor] can monitor the frame (or
the packet) that the computer installing [Network Monitor] sends
or receives. This tool is valuable when analyzing network
trouble.
5. Check the [Include this location in the search] check box and and specifiy the
correct path.
6. Click [Next].
7. Click [Finish].

Re-install the Network Driver

The network driver will be installed automatically.

Optional Network Board Driver

If you want to use an optional Network Board (Gigabit adapter), the network driver
will be installed automatically. Therefore, the driver attached to the Network board
should not be used. If necessary, install the driver stored in NEC ExpressBuilder DVD.
When using 100BASE TX adapters:
"\002\win\winnt\w2k3amd\dl3\pro100\winx64"
When using 1000BASE T adapters:
"\002\win\winnt\w2k3amd\dl3\pro1000\winx64"
If the installation procedure is not clear, refer to the installation procedure described
below.
If available, you can also refer to the manual provided with the board.
Installing the Optional Network Board Driver
1. Start Device Manager.
Note: We recommend you add [Network Monitor] at
354
www.nec-computers.com