User Guide
Configuring Your Server
Overview
Configuration and setup utilities are used to change your server configuration. You can
configure your server, as well as option boards you may add to your server, using the
BIOS Setup Utility. Several unique system parameters are configured using the BIOS
Setup, which is stored in the system FLASH memory.
A RAID Setup Utility configures the RAID system and the logical drives connected to
the onboard RAID controller.
If your system has been factory configured, the BIOS SETUP or the RAID Setup
Utility do not need to be run unless you want to change the password or security
features, add certain types of option boards or devices, upgrade your system board, or
change the RAID configuration.
This chapter also provides information on several system configuration parameters that
are set by jumpers on the system board. However, these parameters do not usually
require any changes.
59
www.nec-computers.com