NEC Express5800 120Rj-2 User Manual page 157

User Guide
8. Locate the DIMM socket of your choice and make sure the clips at both ends of
the socket are pushed outwards to the open position.
9. Push the DIMM straight into the socket.
Position the DIMM so that a notch in the bottom edge of the
DIMM aligns with the keyed socket. Applying too much
pressure can damage the socket. Keyed DIMMs insert only one
way.
To avoid damaging the socket, do not apply excessive force
while pressing the DIMM.
The levers automatically close when the DIMM is inserted into the socket.
10. Reinstall the processor duct.
Note: Make sure of the orientation of the DIMM.
A
B
Figure 109: Inserting the DIMM in the Socket
A: Key Slot
A
Note: Place the internal USB cable onto the processor duct.
Caution
B: Key
157
www.nec-computers.com
B