Main Menu - NEC Express5800 120Rj-2 User Manual

User Guide

Main Menu

Feature
System Time
System Date
Hard Disk Pre-Delay
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
Processor Settings
Language
Primary and Secondary Master & Slave IDE submenus
Table 4: Primary And Secondary Master And Slave IDE Submenus
Feature Choices or
Display Only
Type Auto
None
User
CD-ROM
Multi-Sector Disabled
Transfer 2 Sectors
4 Sectors
8 Sectors
16 Sectors
LBA Mode Control Enabled
Disabled
32-Bit I/O Disabled
Enabled
Table 3: Main Menu
Choices or Description
Display Only
HH:MM:SS Set the System Time.
MM/DD/YYYY Set the System Date.
Disabled Allows to add a delay before the first
3, 6, 9, 12, 15, 21, access of a hard disk drive by the
30 Seconds BIOS.
Selects sub-menu
Selects sub-menu
Selects sub-menu
Selects sub-menu
Selects sub-menu
English (US) Select the display language for the
Français BIOS.
Deutsch
Español
Italiano
Description
Select Auto if a device is attached to the
IDE or serial ATA channel. It is strongly
recommended to keep the factory setting
Auto
Enables or disables multiple sector
transfers support. This field is
informational only, for Type Auto.
LBA stands for "logical block addressing".
Instead of referring to locations by passing
to the disk a cylinder, head and sector
number (CHS addressing), the sectors
are serialized so that each just has an
integer number; 0, 1, 2, etc. up to the total
number of sectors on the disk. Disabled
will disable the LBA mode, Auto will
enable it if the IDE device supports it. This
field is informational only, for Type Auto.
Enables/disables the 32-Bit IDE data
transfer mode.
66
www.nec-computers.com
Your Setting
Your Setting