User Guide
Configuring Motherboard Jumpers
With the pre-installed SETUP utility, you can set desired passwords to protect the data
stored in the server against access from unauthorized users.
If you forget the passwords, however, your only option is to clear them. The following
describes how to clear these passwords. You can also use the following procedure to
clear the CMOS data in the server.
■
Clearing the CMOS data resumes the factory-set configura-
tion data.
■
After clearing CMOS, you must run the BIOS SETUP utility
and execute the following menus to reconfigure your moth-
erboard.
– Load Setup Defaults in the Exit menu
– Memory Retest of Memory Configuration in the Advanced
menu
– Processor Retest of Processor Settings in the Main menu
■
Refer to
ration jumper setting.
■
Do not change any other switch settings. Any change may
cause the server to fail or malfunction.
Do not change any other switch settings. Any change may
cause the server to fail or malfunction.
Caution
"RAID Configuration" on page 83
Warning
60
www.nec-computers.com
for RAID configu-