Suzuki sq-416-420-625 Service Manual page 169

INSTALLATION
Reverse removal procedure, and then noting the following instruc-
tions.
D For tightening torques, refer to structural diagram on previous
page.
D Adjust power steering pump drive belt by referring to "BELT TEN-
SION ADJUSTMENT" under "POWER STEERING PUMP
DRIVE BELT" in this section.
D Fill specified power steering fluid after installation and bleed air
without failure. (Refer to "AIR BLEEDING PROCEDURE" in this
section.)
POWER STEERING (P / S) SYSTEM 3B1-25