Suzuki sq-416-420-625 Service Manual page 501

7D-6 TRANSFER
1. Bolt
2. Engine rear mounting
1. Bolt
2. Transfer assembly
3. Transfer assembly
1. Bolt
2. Transfer assembly
3. Transmission jack
IN CABIN
Remove gear shift lever case and then remove transfer center case
bolt.
ON LIFT
1) Remove transfer mounting (engine rear mounting) by removing
bolts.
2) Apply transmission jack to transfer to support it.
3) Remove couplers for 4WD/4WD-LOW switches lead.
4) Remove transfer front case bolts.
5) With transfer assembly supported with transmission jack, slide
it rearward and when it is apart from transmission, lower it.
REMOUNTING
For remounting, reverse dismounting procedure described above,
noting following.
D Be sure to use specified torque for tightening.
D Clamp wiring and breather hose securely.
D Clamp shift lever boot securely.
D Fill specified gear oil by specified amount.
D Connect battery and check for function.