9-64 BODY SERVICE
SLIDING ROOF (IF EQUIPPED)
SLIDING ROOF GLASS
1. Bolt (Torx T25)
SUNROOF/CONVERTIBLE TOP
REMOVAL
1) Open sunshade fully and tilt up sliding roof.
2) Disconnect battery negative cable at battery.
1. Sun shade
3) Remove sliding roof glass by removing bolts (torx).
INSTALLATION
For installation, reverse removal procedure, noting following
points.
1) Tighten glass fixing bolts temporarily.
2) Position sliding roof glass by closing sliding roof glass complete-
ly.
3) Tighten glass fixing bolts.
1. Sliding roof glass
2. Bolt