Suzuki sq-416-420-625 Service Manual page 688

9-70 BODY SERVICE
INSTALLATION
For installation, reverse removal procedure, noting following
points.
D Align positioning holes in sliding roof assembly at right and left
and pins on body side for installation.
1. Pin on body side
2. Sliding roof
D Connect drain hoses to sliding roof assembly at 4 locations. Pass
front drain hose between roof panel and inner panel and through
front pillar down to sill side. Pass rear drain hose into baring hole
in rear quarter inner panel and through C pillar down to jig hole
in rear side bumper.
NOTE:
After reinstalling sliding roof assembly, be sure to make
glass adjustment. (Refer to SLIDING ROOF GLASS ADJUST-
MENT described previously.)
1. Drain hose