"B"
3
"B"
"A"
1. Release fork
2. Clip
3. Input shaft
4) Install clip to release fork and apply grease.
"A": Grease 99000-25010
Then install release fork and release bearing as shown in figure.
5) Slightly apply grease to input shaft and install clutch disc. Then
join transmission transfer assembly with engine. Refer to SEC-
TION 7A.
"B": Grease 99000-25210
NOTE:
Turn crankshaft with wrench from front while inserting
transmission input shaft to clutch disc until splines mesh.
2
1
1
2
CLUTCH 7C1-13