Suzuki sq-416-420-625 Service Manual page 622

9-4 BODY SERVICE
1, (a)
1. Door sealing cover
2. Adhesive
INSTALLATION
Reverse removal procedure to install door glass noting following
points:
D Tighten glass attaching screws to specified torque. Tighten front
screw first, then rear screw.
Tightening Torque
(a): 2.5 N
D When window becomes hard to raise and lower, adjust screws to
1. Screws
correct tilted glass as shown in figure.
D Adjust equalizer of window regulator so that measurement A and
B are equal.
1. Bolts
D Secure door sealing cover with adhesive.
.
m (0.25 kg-m, 1.8 lb-ft)