I/O System - ABB IRC5 Product Manual

2.8 I/O system

2.8.1. Definition of I/O units, IRC5
General
The IRC5 controller may be fitted with I/O, Gateway or Encoder units. These are configured
in an identical way.
xx0600003256
A
B
Standard configuration
In the standard form, no fieldbus is mounted to the controller. .
It is possible to connect any type of DeviceNet compliant I/O unit on the DeviceNet - DSQC
603 - master bus. All I/O units should comply with the DeviceNet standard and be
conformance tested by ODVA.
I/O units
The table below specifies the I/O units:
Description
AD Combi I/O
Digital I/O
Digital I/O with relay outputs
Analog ±10 V I/O
3HAC027707-001 Revision: D
2 Installation and Commissioning, IRC5
I/O, Gateway or Encoder units
Mounting rail
2.8.1. Definition of I/O units, IRC5
Note
DSQC 651
See I/O System parts for the spare part
number
DSQC 652
See I/O System parts for the spare part
number
DSQC 653
See I/O System parts for the spare part
number
DSQC 355A
See I/O System parts for the spare part
number
Continues on next page
83