ABB IRC5 Product Manual page 104

3 Maintenance activities, controller IRC5
3.4.2. Cleaning the FlexPendant
Continued
Do's and don'ts!
The section below specifies some special considerations when cleaning the FlexPendant.
Always:
Never:
102
•
use ESD Protection
• use cleaning equipment as specified above! Any other cleaning equipment may
shorten the life time of the touch screen.
•
check that all protective covers are fitted to the device before cleaning!
•
make sure that no foreign objects or liquids can penetrate into the device.
• remove any covers before cleaning the FlexPendant!
•
spray with a high pressure cleaner!
• clean the device, operating panel and operating elements with compressed air,
solvents, scouring agent or scrubbing sponges.
3HAC027707-001 Revision: D