Sequential Control Program; Overview - Siemens SINUMERIK 840D sl Operation/Programming Manual

Creating a ShopTurn Program
4

4.3 Sequential control program

4.3

Sequential control program

4.3.1 Overview

4-136
For sequential control programs that you create directly at the
machine, you require a software option.
When creating a sequential control program, always proceed
according to the following diagram:

Create a new program

Assign a program name

Fill out the program head

Program individual machining steps
The following listed machining steps can be selected.
Tool
Straight
Circle
center
Circle
radius
Polar
Approach/
Retract
Drilling
centric
Thread
centric
Drilling
Reaming >
Deep hole
drill
Thread
Positions
Repeat
Position >
Solid
machin. >
Recess
SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
>
>
>
>
>
>
>
>
>
Tapping
>
Thread
drilling
>
>
♥ Siemens AG, 2005. All rights reserved
08/2005
4