Straight Turning - Siemens SINUMERIK 840D sl Operation/Programming Manual

Working with Manual Machine
6
6.3 Simple workpiece machining in manual mode

6.3.3 Straight turning

Jog
All
axes
-or-
Xα
-or-
Zα
Parameter
F See Sec. "Traversing the Axes"
All Axes:
X Target position in direction X (abs. or inc.)
Z Target position in direction Z (abs. or inc.)
Y Target position in direction Y (abs. or inc.)
C Target position of the C-axis of the main spindle (abs. or inc.)
Z2 Target position of an added axis, if it exists (abs. or inc.)
XAlpha
Z Target position in direction X (abs. or inc.)
α
Angle of the straight line to the X-axis
ZAlpha
X Target position in direction Z (abs. or inc.)
α
Angle of the straight line to the Z-axis
6-338
Use this function for simple, straight machining (e.g. face or
longitudinal turning).
Select the "Strght" softkey in "Manual Machine" mode.
Select the desired straight machining via the "All axes" softkeys,
"Xα" or "Zα", and input the desired values for the traversing path
or target position and the angle, if necessary.
Description
SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
08/2005
6
Unit
mm
mm
mm
mm
mm
mm
Degrees
mm
Degrees
© Siemens AG, 2005. All rights reserved