Straight And Circular Machining; Straight Turning - Siemens SINUMERIK 828D Operating Manual

Working with Manual Machine
15.5 Simple workpiece machining
Parameter
T
D
ST
F
S / V
Spindle M function
Gear stage
α1
Other M function
Machining plane
15.5.3

Straight and circular machining

15.5.3.1

Straight turning

Use this function for simple, straight machining (e.g. face or longitudinal turning).
Procedure
810
Description
Tool name
Cutting edge number
Feedrate
Spindle speed or constant cutting rate
Spindle off: Spindle is stopped
CCW rotation: Spindle rotates counterclockwise
CW rotation: Spindle rotates clockwise
Specification of the gear stage (auto, I - V)
Rotation of the coordinate system.
Input of machine functions
Refer to the machine manufacturer's table for the correlation between the meaning
and number of the function.
Selection of the machining plane (G17(XY), G18 (ZX), G19 (YZ))
1. "Manual Machine" is active.
2. Press the "Straight circle" softkey.
3. Select the desired straight machining and press the "All axes" softkey
- OR -
Press the softkey "Straight X α"
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Unit
mm/min
mm/rev
rev/min
m/min
Degrees
Turning