Programming technology functions (cycles)
9.7 Additional cycles and functions in ShopTurn
Parameter
Function, rear face
Work offset
Write to the work offset
ZV (abs) - only for work
offset. write "yes"
ZV (inc)
See also
Program header (Page 250)
Program header with multi-channel data (Page 628)
610
Description
Work offset in which the coordinate system, which was shifted according to ZW
and by ZV as well as mirrored in Z, must be saved:
Basic reference
•
G54
•
G55
•
G56
•
G57
•
...
•
Yes
•
The Z value of the work offset can be directly written to the input screen form.
No
•
The actual Z value of the work offset is used.
Z value of the work offset.
Workpiece zero is offset in Z direction (the sign is also evaluated)
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Unit
mm
mm
Turning