Siemens SINUMERIK 828D Operating Manual page 909

Computerized numerical controller for machine tools

Hide thumbs Also See for SINUMERIK 828D:

Table of Contents

Operating Manual, 01/2015, 6FC5398-8CP40-5BA2

Select the desired cross reference and press the "Open in window 1" or

"Open in window 2" softkey.

The ladder diagram is opened, and the selected operand is marked.

Press the "Find" softkey.

The "Find / Go To" window appears.

Select "Find operand" or "Go to" and enter the sought element or the

desired line and select the search order (e.g. search up).

Press the "OK" softkey to start the search.

If an an element is found that corresponds to the sought element, but is

not at the appropriate position, press the "Continue search" softkey to

find where the search term occurs next.

Edit PLC user program (828D only)

24.20 Displaying cross references

Sinumerik 840d sl