Equipping Multitool With Tools - Siemens SINUMERIK 828D Operating Manual

Tool management
12.15 Working with multitool
12.15.3

Equipping multitool with tools

Precondition
A multitool has been created in the tool list.
Procedure
Equip the multitool with tools
Load multitool
Load the tool into the multitool
724
1. The tool list is opened.
2. Select the required multitool, position the cursor on an empty
multitool location.
3. Press the "New tool" softkey.
4. Using the appropriate selection list, e.g. favorites, select the re-
quired tool.
2. Select the required multitool, position the cursor on an empty
multitool location.
3. Press the "Load" softkey.
The "Load with..." window opens.
4. Select the required tool.
2. Position the cursor on the tool that you want to load into the multi-
tool.
3. Press the "Load" and "Multitool" softkeys.
The "Load to..." window opens.
4. Select the required multitool and the multitool location to which
you wish to load the tool.
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Turning