Siemens SINUMERIK 828D Operating Manual page 608

Programming technology functions (cycles)
9.7 Additional cycles and functions in ShopTurn
Parameter
Machining side
function
Machining
Work offset
Write to the
work offset
ZV - only for work off-
set write "yes"
Park counter-spindle -
for machining with main
spindle
Z4P - for machining
with main spindle
Z4W - for machining
with counter-spindle
608
Description
Selection of the spindle for machining:
Main spindle
•
Machining on the main spindle
Counter-spindle
•
Machining on the counter-spindle
Work offset in which the coordinate system, which was shifted according to ZW
and by ZV as well as mirrored in Z, must be saved:
Basic reference
•
G54
•
G55
•
G56
•
G57
•
...
•
Yes
•
The Z value of the work offset can be directly written to the input screen form.
No
•
The actual Z value of the work offset is used.
Offset Z = 0 (abs)
•
Workpiece zero is offset in Z direction (inc, the sign is also evaluated)
•
Yes
•
The counter-spindle is traversed to the park position.
No
•
The counter-spindle is not traversed.
Park position of the counter-spindle (abs); MCS
Machining position of the counter-spindle (abs); MCS
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Unit
mm
mm
mm
Turning