Circular Turning - Siemens SINUMERIK 828D Operating Manual

Working with Manual Machine
15.5 Simple workpiece machining
15.5.3.2

Circular turning

You can use this function for a simple circular machining.
Procedure
Parameters
Parameter
F
Circle input
Direction of rotation
X
Z
I
K
R
812
1. "Manual Machine" is active.
2. Press the "Straight circle" softkey.
3. Press the "Circle" softkey.
4. Specify the desired value for the feedrate F.
5. Select the desired circle input (e.g. "End point + radius") and the direc-
tion of rotation.
6. Enter the target position as well as the circle center point or radius.
Using the "Graphic view" softkey, you can toggle between the help
screen and the graphic view in the screen.
Description
Feedrate
End point + center point
•
End point + radius
•
Clockwise direction of rotation
Counter-clockwise direction of rotation
Target position in the X direction (abs and inc)
Target position in the Z direction (abs and inc)
Circle center point I (inc) - only if circle input via end point and center point
Circle center point K (inc) - only if circle input via end point and center point
Note:
Incremental dimensions: The sign is also evaluated.
Radius - only if circle input via end point and radius
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Unit
mm/min
mm/rev
mm
mm
mm
mm
mm
Turning