Siemens SINUMERIK 828D Operating Manual page 316

Programming technology functions (cycles)
9.1 Drilling
Parameters in the "Input complete" mode
G code program parameters
Input
PL Machining plane
RP Retraction plane
SC Safety clearance
F
S / V
Direction of spindle rotation
Spindle speed or constant
cutting rate
Parameter Description
Machining
Single position
•
position
Drill hole at programmed position
(only G
Position pattern with MCALL
•
code)
Z0 (only G Reference point Z
code)
Machining
Face
•
surface
Face B
•
Peripheral
•
(only Shop-
Turn)
Drilling depth
Shank (drilling depth in relation to the shank)
•
The drill is inserted into the workpiece until the drill shank reaches the value
programmed for Z1. The angle entered in the tool list is taken into account.
Tip (drilling depth in relation to the tip)
•
The drill is inserted into the workpiece until the drill tip reaches the value pro-
grammed for Z1.
Z1 Final drilling depth (abs) or final drilling depth in relation to Z0 (inc).
It is inserted into the workpiece until it reaches Z1.
Coolant on - M function to switch on the coolant.
(only G code)
316
ShopTurn program parameters
Complete
•
mm T
mm D
F
S / V
rpm
Dis-
tance/min
Tool name
Cutting edge number
Feedrate
Spindle speed or constant
cutting rate
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
mm/min
mm/rev
rpm
m/min
Unit
mm
mm
Turning