Setting The Tolerance - Siemens SINUMERIK 828D Operating Manual

Computerized numerical controller for machine tools

Hide thumbs Also See for SINUMERIK 828D:

Table of Contents

Setting the tolerance

To allow even inaccurately created drawings to be used, i.e. to compensate for gaps in the

geometry, you can enter a snap radius in millimeters. This relates elements.

Large snap radius

The larger that the snap radius is set, the larger the number of available following elements.

Operating Manual, 01/2015, 6FC5398-8CP40-5BA2

Press the "Arc center" softkey to place the zero point at the center of an

Press the "Cursor" softkey to define the zero point at any cursor posi-

Press the "Free input" softkey to open the "Reference Point Input" win-

dow and enter the values for the positions (X, Y) there.

The DXF file is opened in the editor.

Press the "Details" and "Tolerance" softkeys.

The "Tolerance Input" window opens.

Enter the desired value and press the "OK" softkey.

Machining the workpiece

5.16 Working with DXF files

Sinumerik 840d sl