Machining With Fixed Counterspindle - Siemens SINUMERIK 828D Operating Manual

Computerized numerical controller for machine tools

Hide thumbs Also See for SINUMERIK 828D:

Table of Contents

Machining with fixed counterspindle

If your lathe is equipped with a second spindle, which is setup as a counterspindle and

cannot be traversed, then the workpieces must be manually reclamped

Machining with main spindle and counterspindle

For instance, a new blank can be clamped in the main spindle, and a blank that has already

been machined at the front can be clamped in the counterspindle. With the ShopTurn

program, initially the workpiece is machined in the main spindle, and then the rear side of the

workpiece, already machined at the front, is machined in the counter spindle.

Various workpieces

You have the option of machining two different workpieces at the main spindle and

counterspindle.

Function, front face

Operating Manual, 01/2015, 6FC5398-8CP40-5BA2

Machine manufacturer

Please refer to the machine manufacturer's specifications.

Machine manufacturer

Please refer to the machine manufacturer's specifications.

You can select one of the following functions:

Work offset for machining the next front face:

Basic reference

Programming technology functions (cycles)

9.7 Additional cycles and functions in ShopTurn

Sinumerik 840d sl