Note
A multi-edge with more than two edges is traversed helically; with a single or double
edge, each edge is machined separately.
Procedure
Parameters in the "Input complete" mode
Parameters, G code program
Input
PL
Machining plane
Milling direction
RP
Retraction plane
SC
Safety clearance
F
Feedrate
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
1.
The part program or ShopTurn program to be processed has been cre-
ated and you are in the editor.
2.
Press the "Milling" softkey.
3.
Press the "Multi-edge spigot" and "Multi-edge" softkeys.
The "Multi-edge" input window opens.
Complete
•
mm
mm
*
Programming technology functions (cycles)
Parameters, ShopTurn program
T
Tool name
D
Cutting edge number
F
Feedrate
S / V
Spindle speed or constant cut-
ting rate
9.4 Milling
mm/min
mm/tooth
rpm
m/min
469