Siemens SINUMERIK 828D Operating Manual page 761

Specifications for network drives
Entry
Computer name
Release name
Path
User name
Password
Symbolic
Specifications for FTP
Entry
Computer name
Path
User name
Password
Additional parameters under Details
Port
Disconnect
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Only for network drives in
Windows systems.
Managing programs
13.12 Set up drives
Description
Logical name of the server or the IP address.
Name, under which the network drive was
released
Start directory.
The path is specified relative to the released
directory.
Enter the user name and the corresponding
password for which the directory is enabled
on the server.
The password is displayed in encoded form
as string of "*" characters and is stored in the
"logdrive.ini" file.
Symbolic drive name.
Maximum 12 characters can be entered
(letters, numbers, underscore).
The names NC, GDIR and FTP are reserved.
It is also used to label the softkey if a softkey
text is not specified.
Description
Logical name of the FTP server or the IP
address.
Start directory on the FTP server.
The path is specified relative to the home
directory.
User names and the associated password for
login to the FTP server.
The password is displayed in encoded form
as string of "*" characters and is stored in the
"logdrive.ini" file.
Interface for the FTP connection. The default
port is 21.
After a disconnect timeout, the FTP connec-
tion is disconnected. The timeout can be
between 1 and 150 s. 10 s is the default
setting.
761