Siemens SINUMERIK 828D Operating Manual page 332

Programming technology functions (cycles)
9.1 Drilling
Procedure
Parameters, G code program
PL Machining plane
RP Retraction plane
SC Safety clearance
Parameters Description
Machining posi-
Single position
•
tion
Drill hole at programmed position
(only for G code)
Position pattern
•
Position with MCALL
F1 Drilling feedrate
(only for G code)
Z0 Reference point Z
(only for G code)
Machining
Face C
•
surface
Face Y
•
(only for Shop-
Peripheral surface C
•
Turn)
Peripheral surface Y
•
Position
At the front (face)
•
(only for Shop-
At the rear (face)
•
Turn)
Outside (peripheral surface)
•
Inside (peripheral surface)
•
332
1. The part program or ShopTurn program to be processed has been cre-
ated and you are in the editor.
2. Press the "Drilling" softkey.
3. Press the "Thread" and "Cut thread" softkeys.
The "Drilling and thread milling" input window opens.
mm
mm
Parameters, ShopTurn program
T Tool name
D Cutting edge number
F Feedrate
S / V Spindle speed or constant cut-
ting rate
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
mm/min
mm/rev
rpm
m/min
Unit
mm/min
mm/rev
mm
Turning