Transferring The Drilling Positions - Siemens SINUMERIK 828D Operating Manual

Machining the workpiece
5.16 Working with DXF files
5.16.3.4

Transferring the drilling positions

Calling the cycles
Selecting the drilling positions
Precondition
You have selected a position pattern.
188
1. The part program or ShopTurn program to be processed has been cre-
ated and you are in the editor.
2. Press the "Drilling" softkey.
3. Press the "Positions" softkey.
4. Press the "Arbitary positions" softkey.
The "Positions" input window opens.
- OR -
Press the "Line" softkey.
The "Position Row" input window opens.
- OR -
Press the "Grid" softkey.
The "Position Grid" input window opens.
- OR
Press the "Frame" softkey.
The "Position Frame" input window opens.
- OR -
Press the "Circle" softkey.
The "Position Circle" input window opens.
- OR -
Press the "Partial circle" softkey.
The "Position Partial Circle" input window opens.
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Turning