Editor Settings - Siemens SINUMERIK 828D Operating Manual

5.10.7

Editor settings

Enter the default settings in the "Settings" window that are to take effect automatically when
the editor is opened.
Defaults
Setting
Number automatical-
ly
First block number
Increment
Display hidden lines
Display block end a
symbol
Line break
Line break also in
standard cycles
Visible programs
Width of the program
with focus
Turning
Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Meaning
Yes: A new block number will automatically be assigned after every line
•
change. In this case, the specifications provided under "First block num-
ber" and "Increment" are applicable.
No: No automatic numbering
•
Specifies the starting block number of a newly created program.
The field is only visible when "Yes" is displayed under "Number automatical-
ly".
Defines the increment used for the block numbers.
The field is only visible when "Yes" is displayed under "Number automatical-
ly".
Yes: Hidden lines marked with "*HD" (hidden) will be displayed.
•
No: Lines marked with ";*HD*" will not be displayed.
•
Note:
Only visible program lines are taken into account with the "Search" and
"Search and Replace" functions.
The "LF" (line feed) symbol ¶ is displayed at the block end.
Yes: Long lines are broken and wrapped around.
•
No: If the program includes long lines, then a horizontal scrollbar is dis-
•
played. You can move the section of the screen horizontally to the end of
the line.
Yes: If the line of a cycle call becomes too long, then it is displayed over
•
several lines.
No: The cycle call is truncated.
•
The field is only visible when "Yes" is displayed under "Line break".
1 - 10
•
Select how many programs can be displayed next to one another in the
editor.
Auto
•
Specifies that the number of programs entered in a job list or up to 10 se-
lected programs will be displayed next to each other.
Here, you enter the width of the program that has the input focus in the editor
as a percentage of the window width.
Machining the workpiece
5.10 Editing a program
153