Siemens SINUMERIK 840D sl Operation/Programming Manual page 149

08/2005
4
Opening the program
editor
Program block:
Selecting
Mark
Program block: Copying
Copy
Program block: Cutting
Cut
Program block: Pasting
Insert
♥ Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
Select a program.
Press the "Expansion" key.
The softkeys for the program editor are displayed in the vertical
softkey bar.
Place the cursor in the machining plan on the first or last block
you want to select.
Press the "Mark" softkey.
Use the cursor keys to select any further program blocks.
The program blocks are marked.
Select the program block(s) in the machining plan.
Press the "Copy" softkey.
The program blocks are copied into buffer memory.
Select the program block(s) in the machining plan.
Press the "Cut" softkey.
The program blocks are removed from the machining plan and stored
in buffer memory.
Copy or cut the desired program blocks in the machining plan.
Place the cursor on the line after which the program block(s) is
(are) to be inserted.
Press the "Insert" softkey.
The program blocks are inserted in the machining plan of the program.
Creating a ShopTurn Program
4
4-149