Managing Programs With Shopturn On Ncu (Hmi Embedded) - Siemens SINUMERIK 840D sl Operation/Programming Manual

08/2005
9

9.2 Managing programs with ShopTurn on NCU (HMI Embedded)

9.2 Managing programs with ShopTurn on NCU (HMI Embedded)
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
For the ShopTurn variant on the NCU (HMI Embedded), all the
programs and data are always kept in the NCK work memory.
In addition, the directory management of a USB/network-drive can be
displayed.
ShopTurn user interface on NCU
(HMI Embedded)
edit
ShopTurn programs
ShopTurn subroutines
G code programs
USB/
Network drive
Data storage with ShopTurn on NCU (HMI Embedded)
You will find an overview of all directories and programs in the
Program Manager.
Program manager for ShopTurn on NCU (HMI Embedded)
In the horizontal softkey bar, you can select the storage medium that
contains the directories and programs that you want to display. In
addition to the "NC" softkey, via which the data of the NCK-work
memory can be displayed, another 8 softkeys can allow you to display
the directories and programs of USB/network-drives and the CF-card-
drive.
Program Management
edit
ShopTurn programs
ShopTurn subroutines
G code programs
NC main memory
9
9-375