Siemens SINUMERIK 840D sl Operation/Programming Manual page 3

08/2005
0
Preface
SINUMERIK-
documentation
Target group
Standard version
Hotline
♥ Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
The SINUMERIK documentation is organized in 3 parts:

General documentation

User documentation

Manufacturer/service documentation
For more detailed information on additional publications for the
SINUMERIK 840D sl, that apply to all SINUMERIK control systems,
(e.g. universal interfaces, measuring cycles, etc.), see your Siemens
representative.
An overview of publications, which is updated monthly and also
provides information about the language versions available, can be
found on the Internet at:
http://www.siemens.com/motioncontrol
Select the menu items "Support"
"Publications Overview."
The Internet version of DOConCD (DOConWEB) is available at:
http://www.automation.siemens.com/doconweb
This documentation is geared toward the operator of single-slide
lathes with SINUMERIK 840D sl.
The functionality of the operator interface for ShopTurn is described in
these operating/programming instructions. Extensions or changes
made by the machine tool manufacturer are documented by the
machine tool manufacturer.
Other functions not described in this documentation might be
executable in the control. This does not, however, represent an
obligation to supply such functions with a new control or when
servicing.
If you have any queries, please contact the following hotlines:
A&D Technical Support
Phone: +49 (0) 180 5050-222
Fax: +49 (0) 180 5050-223
E-mail: mailto:adsupport@siemens.com
Internet: http://www.siemens.com/automation/support-request
Technology hotline
Tel.: +49 (0) 2166 5506-115
The hotline is available on weekdays from 8:00-17:00.
If you have any queries (suggestions, corrections) in relation to this
documentation, please fax or e-mail us:
Fax: +49 (0) 9131 98-63315
E-mail: mailto:motioncontrol.docu@siemens.com
Fax form, see the reply form at the end of the publication
Preface
"Technical Documentation"
0
iii