Taper Turning - Siemens SINUMERIK 840D sl Operation/Programming Manual

08/2005
6
Parameter
T Tool
F Machining feedrate
S1 Main spindle
S2 Tool spindle
Direction of
rotation

6.3.2 Taper turning

Taper
Jog
turning
Parameter
T, F. S See Sec. "Traversing the Axes"
α
Turning of the coordinate system
♥ Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
6.3 Simple workpiece machining in manual mode
Description
: Spindle is turning counterclockwise
: Spindle rotates right
: Spindle stops
: No change
The basic effective direction can be selected via the axis direction
keys or via the cross-switching lever. In addition, an angle (α
be input.
Press the "Taper turning" softkey in "Manual Machine" mode.
Select the tool, spindle, and spindle direction and specify the
machining feedrate.
Input the desired angle α.
Selecting/deselecting the taper turning and changing the angle α is
only possible in the reset state.
Description
Working with Manual Machine
) can also
6
Unit
mm/min
mm/rot.
rpm
m/min
rpm
Unit
Degrees
6-337