Siemens SINUMERIK 840D sl Operation/Programming Manual page 63

08/2005
2
-or-
♥ Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
Coolant supply 1 and 2 (e.g. internal and external cooling) ON/OFF
Coolant ON
Coolant OFF
The coolant supply on the machine does not necessarily have to be
set-up.
Please also refer to the machine manufacturer's instructions.
Enter the desired tool name and the values for the tool offset data
in the tool list.
Press the "Alternat." softkey or the "Select" key to carry out the
desired settings for the tool-specific functions.
Setting Up the Machine
2
2.5 Tools
2-63