Calculation Parameters - Siemens SINUMERIK 840D sl Operation/Programming Manual

G Code Program
7

7.4 Calculation parameters

7.4 Calculation parameters
Displaying R variables
-or-
Search for R-parameter
Search
Change R-parameter
Delete R-parameter
7-352
Arithmetic variables (R variables) are variables that you can use within
a G code program.
G code programs can read and write the variables. You can assign a
value in the R variable list to variables that can be read.
Input and deletion of variables can be disabled via the keyswitch.
Press the "Tools WOs" softkey or the "Offset" key.
Press the "R vari." softkey.
The R variable list is opened.
Press the "Search" softkey.
Enter the number of the variable you want to find.
Press the "Accept" softkey.
The variable is displayed.
Place the cursor on the input field of the variable that you want to
change.
Enter the new value.
The new value of the variables is applied immediately.
Place the cursor on the input field of the variable whose value you
want to delete.
Press the "Backspace" key.
The value of the variable is deleted.
SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
08/2005
7
♥ Siemens AG, 2005. All rights reserved