08/2005
2
Back to
manual
Setting the unit of
measurement
Jog
♥ Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
-and-
Press the "Back to manual" softkey.
The work offset will be active the next time you press the "Cycle Start"
key.
Select the "T, S, M" softkey in "Machine Manual" mode.
Select the unit of measure.
The unit of measurement will be active in manual mode the next time
you press the "Cycle Start" key.
Setting Up the Machine
2.8 Manual mode
2
2-85